feat(superslicer): add new filament

2 files changed, 94 insertions, 2 deletions

diff --git a/superslicer/.config/SuperSlicer/filament/PLA_Black@Overture.ini b/superslicer/.config/SuperSlicer/filament/PLA_Black@Overture.ini
new file mode 100644
index 0000000..66e85ba
--- /dev/null
+++ b/superslicer/.config/SuperSlicer/filament/PLA_Black@Overture.ini
@@ -0,0 +1,92 @@
+# generated by SuperSlicer 2.5.59.13 on 2024-09-02 at 16:50:02 UTC
+bed_temperature = 60
+bridge_fan_speed = 100
+bridge_internal_fan_speed = -1
+chamber_temperature = 0
+compatible_printers = 
+compatible_printers_condition = 
+compatible_prints = 
+compatible_prints_condition = 
+default_fan_speed = 100
+disable_fan_first_layers = 1
+end_filament_gcode = "; Filament-specific end gcode \n;END gcode for filament\n"
+external_perimeter_fan_speed = -1
+extrusion_multiplier = 1
+fan_below_layer_time = 100
+filament_colour = #000000
+filament_cooling_final_speed = 3.4
+filament_cooling_initial_speed = 2.2
+filament_cooling_moves = 4
+filament_cooling_zone_pause = 0
+filament_cost = 14.94
+filament_custom_variables = ""
+filament_density = 1.24
+filament_deretract_speed = nil
+filament_diameter = 1.75
+filament_dip_extraction_speed = 70
+filament_dip_insertion_speed = 33
+filament_enable_toolchange_part_fan = 0
+filament_enable_toolchange_temp = 0
+filament_load_time = 0
+filament_loading_speed = 28
+filament_loading_speed_start = 3
+filament_max_overlap = 100%
+filament_max_speed = 0
+filament_max_volumetric_speed = 15
+filament_max_wipe_tower_speed = 0
+filament_melt_zone_pause = 0
+filament_minimal_purge_on_wipe_tower = 15
+filament_notes = ""
+filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
+filament_retract_before_travel = nil
+filament_retract_before_wipe = nil
+filament_retract_layer_change = nil
+filament_retract_length = nil
+filament_retract_lift = nil
+filament_retract_lift_above = nil
+filament_retract_lift_before_travel = nil
+filament_retract_lift_below = nil
+filament_retract_restart_extra = nil
+filament_retract_speed = nil
+filament_seam_gap = 1.79769e+308
+filament_settings_id = ""
+filament_shrink = 100%
+filament_skinnydip_distance = 31
+filament_soluble = 0
+filament_spool_weight = 1000
+filament_toolchange_delay = 0
+filament_toolchange_part_fan_speed = 50
+filament_toolchange_temp = 200
+filament_type = PLA
+filament_unload_time = 0
+filament_unloading_speed = 90
+filament_unloading_speed_start = 100
+filament_use_fast_skinnydip = 0
+filament_use_skinnydip = 0
+filament_vendor = Generic
+filament_wipe = nil
+filament_wipe_advanced_pigment = 0.5
+filament_wipe_extra_perimeter = nil
+filament_wipe_inside_depth = nil
+filament_wipe_inside_end = nil
+filament_wipe_inside_start = nil
+filament_wipe_only_crossing = nil
+filament_wipe_speed = nil
+first_layer_bed_temperature = 65
+first_layer_temperature = 210
+full_fan_speed_layer = 4
+gap_fill_fan_speed = -1
+infill_fan_speed = -1
+inherits = Generic PLA @CREALITY
+max_fan_speed = 100
+max_speed_reduction = 90%
+min_print_speed = 15
+overhangs_fan_speed = -1
+perimeter_fan_speed = -1
+slowdown_below_layer_time = 20
+solid_infill_fan_speed = -1
+start_filament_gcode = "; Filament gcode\n"
+support_material_fan_speed = -1
+support_material_interface_fan_speed = -1
+temperature = 205
+top_fan_speed = -1
diff --git a/superslicer/.config/SuperSlicer/filament/PLA_Matte_Gray@Duramic.ini b/superslicer/.config/SuperSlicer/filament/PLA_Matte_Gray@Duramic.ini
index dfa45b7..b5056b5 100644
--- a/superslicer/.config/SuperSlicer/filament/PLA_Matte_Gray@Duramic.ini
+++ b/superslicer/.config/SuperSlicer/filament/PLA_Matte_Gray@Duramic.ini
@@ -1,10 +1,10 @@
-# generated by SuperSlicer 2.5.59 on 2024-01-08 at 22:57:33 UTC
+# generated by SuperSlicer 2.5.59.13 on 2024-09-02 at 16:49:47 UTC
 bed_temperature = 60
 bridge_fan_speed = 100
 bridge_internal_fan_speed = -1
 chamber_temperature = 0
 compatible_printers = 
-compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_CREALITY.*/
+compatible_printers_condition = 
 compatible_prints = 
 compatible_prints_condition = 
 default_fan_speed = 100