diff options
Diffstat (limited to 'guide/README.md')
| -rw-r--r-- | guide/README.md | 62 |
1 files changed, 62 insertions, 0 deletions
diff --git a/guide/README.md b/guide/README.md new file mode 100644 index 0000000..16163c1 --- /dev/null +++ b/guide/README.md @@ -0,0 +1,62 @@ +# Dactyl Flexible PCB Rough Guide + + + +For now, take a look at the images and try to figure things out, I know that's not great (it's better than nothing!) + +## Making the PCB + +Get two sheets of 6in square Pyralux™. Use the Toner Transfer +method to etch the Pyralux sheets as you would a usual PCB + +> NOTE: If you only have an Inkjet make photocopies of the print out, voilà Toner based copies! + +[Here's a handy toner transfer guide ... ](http://www.instructables.com/id/Toner-transfer-no-soak-high-quality-double-sided/) + +Print these PCB designs out... + +Left hand: + + + +Right hand: + + + +When you're done etching, you'll need to carefully cut the pcb into +pieces... See the images below. + +## This is Madness... + +The thumb cluster pcb for the left hand: + + + +Solder the MCP like so: + + + + + +Solder the Teensy 2.0 like so: + + + +Some interesting pull up 10k resistor business here... (TODO add a small diagram and notes) + + + +Each hand of the keyboard will wire up like so: + + + +Teensy goes here... note the rows soldered to the teensy via the Pyralux: + + + + +Here the left hand: + + + +That's all for now, this guide will improve over time! (TODO!) |